Automatic Infrared PIR Motion Sensor Switch For Light/Fan (110V~220V, AC)

(0 reviews)

Sold by:
Inhouse product

৳800.00 /pc

(50 available)

Total Price:

Automatic Infrared PIR Motion Sensor Switch For Light/Fan (110V~220V, AC)

High-Performance PIR motion sensor switch
Adjustable time delay 10 seconds to 7 minute
Ambient Light: 3-2000LUX (adjustable)
Suitable for Light/Fan or similar appliances
Made in China

Product Description:

Automatic PIR Motion Sensor Switch in Bangladesh:
You can save up to 60% of electricity with this Infrared motion sensor. This is High Sensitivity 360 degree 110V/220V AC Automatic Ceiling Infrared PIR Motion Sensor LED Light Switch. This sensor is a motion switch that turns on the light on detection of people's movement and turns off after a pre-selected hold time when there are no people around. A daylight sensor is also a built-in tow switch off the light when there is sufficient natural light. Now this 360 degree 110V~220V AC Automatic Ceiling infrared Sensor is available in Bangladesh @ BDSHOP.COM.

Features: PIR motion sensor switch
Model Number: SP-S02
principle: PIR motion sensor
Time Delay: 10 seconds to 7 minutes
Ambient Light: 3-2000LUX (adjustable)
Detection Distance: 6m max (24 degrees)
input voltage:110 -240V/AC
Rated Load::1200W (incandescent lamp) 300W (energy-saving)
Switch Type: Sensor Switch
Material: Plastic
Power Frequency:50Hz
Detection Range: 120/360 degrees.

Key Feature:
Can identify day and night: The consumer can adjust work ambient light. It can work in the daytime and at night when it is adjusted to the "sun" position (max). It can work in the ambient light of less than 3LUX when it is adjusted to the "moon" position (min). As for the adjustment pattern, please refer to the testing pattern.
Time-Delay is added continually: When it receives the second induction signals after the first induction, it will compute time once more on the basis of the first time-delay rest.
Time-Delay is adjustable. It can be set according to the consumer's desire. The minimum time is 7sec±2sec. The maximum is 7min±2min.

Testing the switch:
Turn the TIME knob to minimum (-) position anti-clockwise. Turn the LUX knob to the SUN position anti-clockwise.
Switch on the power; the controlled load and indication lamp both are not working. Preheat 30 sec later, the load and indication lamp should be turned on synchronization. In the absence of no inductor signals, the load should be stopped working within 5-30sec, the indicator lamp is turned off.
After the first sense is finished, and it will sense again after 5~10sec. The load should work. When there are no inductor signals in the indicator lamp, the load should be stopped working within 5-15sec.
Turn the LUX knob clockwise on the minimum (MOON position). If it is adjusted in less than 10LUX, the inductor load should not work after the load stop working. If you cover the detection window with the opaque objects (towel etc), the load work. under no induction signal condition, the load should stop working within 5-15sec.

Note: When testing in daylight, please turn the LUX knob to (SUN) position, otherwise, the sensor lamp could not work.

Package included:
1*infrared motion sensor switch

Connection Diagram:
Here is the basic & simple connection diagram of the Motion Sensor. You can easily connect the sensor to control light or Fan or other similar appliances.


For more information Call Us : 01674368628 OR message Us:

There have been no reviews for this product yet.