Veterinary Defibrillator Monitor (DM7000)

(0 reviews)

Inhouse product

320,000 ৳320,000.00 /1
Total Price

Reviews & Ratings

0.00 out of 5.0
(0 reviews)
There have been no reviews for this product yet.

Veterinary Defibrillator Monitor (DM7000)

Product NameDefibrillator Monitor
Model NO.DM7000
ECG Monitoring3-Lead ECG Cable
Display:7″ TFT
Sweep Speed:25mm/Sec
Information:Information: Heart Rate, Lead/Pads, Alarm on/off.
Defibrillator Type:Manual, Synchronized, Asynchrony
Charge Time:Less Than 7 Seconds
Transport PackageCarton

Product Description:

DM7000 is a defibrillation device, which can meet your clinical needs from Basic Life Support (BLS) to Advanced Cardiac Life Support (ACLS).

  • Display Type: High-resolution screen Screen Size: 7 inches (17.7 cm) diagonally Sweep Speed: 25mm / sec Information: Heart Rate, Lead / Pads, On / Off Alarm, SpO2, AED Functions and Prompts, Alarm Range and Limits, Delivered Power.
  • Charge Time: With a new fully charged battery for less than 7 seconds.
  • Energy screen: The display of the panel shows the energy selected and the energy supplied.
  • Prompt style charging: voice and visual prompts.
  • The scale of measurement of the electrode impedance: 0-250 ohms.
ECG Monitoring
  • Patient Connection: paddles with3-lead ECG or5-lead ECG cable.
  • Lead Selection: displayed on screen, paddles, I, II, III, AVR, AVL, AVF, V. ECG Size: 0.25, 0.5, 1, 1.5, 2, 4 cm / mV on screen.
  • Heart Rate: 20-300BPM. Heart Rate Alarm: On / Off displayed on monitor, user-selectable.
  • Smart Alarms: Beeper/voice prompts indicate a shockable rhythm.
  • Type: Ni-MH cell, rechargeable, 12V.
  • Running time: for a clean, fully charged battery: 60 defibrillator discharges at maximum power, or a total of 3 hours of continuous ECG monitoring. Additional parameters can result in different functions in running time.
SpO2 Module
  • Measurement range: 30~100 percent, ±2 percent ranging from 80 percent to 90 percent, other ±5 percent warning range: user-set high and low cap.
  • Warning accuracy: inside setting values of ±10 percent.
  • Precise alarm time: less than 12 seconds.
  • Paper: thermal 50 mm.
  • Speed: 12.5 mm per second, 25 mm per second, 50 mm per second. 6-second delay selectable for the consumer.
Printing method:
  • thermal print head with high resolution.
  • Modes for printing: manual and automatic, user-friendly.
    On/Off Control: Front panel and paddle.
    Automatic Function: 9-seconds recording initiated by alarm activation or defibrillator charge or defibrillator discharge.
AED Function:
  • Auto evaluate and load x3 with choice of programmable auto energy level, display prompts and voice prompts.
  • Shockable rhythms: Amplitude ventricular fibrillation >= 200uV, frequency ventricular tachycardia >= 140bpm, and complex wave length of QRS >= 140ms.
  • Control of the load: control of the front panel of the device, press the paddle key.
Manual Mode
  • Selection of energy: 2, 5, 7, 10, 20, 30, 50, 70, 100, 150, 200, 300, 360 joules are selectable.
  • Synchronized mode: synchronizes the R-wave of the patient with the defibrillator pulse. Text “SYNC” shown on the screen.

For more information Call Us : 01674368628 OR message Us:

Related products

Product Queries (0)

Login Or Registerto submit your questions to seller

Other Questions

No none asked to seller yet